Longines is brand of watch, originally a company founded by Ernest Francillon at Saint-Imier, Switzerland. Its origins can be traced back to the 1830s and it currently holds the oldest registered logo for a watch company. Longines is currently owned by the Swatch Group. Longines watches with leather bands come with classical attachments, which means that the bands are perfectly attached by spring pins. This band attachment can be seen everywhere. If you find a watch brand fit to your Longines watch, you can change it yourself.InstructionsStep 1Remove the current Longines Replica
fake watches,
replica watches watches and
tag heuer watches watch band. Place the watch face down on a soft cloth, so the crystal does not get damaged. Take the watch spring tool and put the forked end on the spring pin. The spring is what attaches the band to the watch. The spring is located between the case lug, which has the holes where the pin is inserted, and the leather band.Step 2Compress the spring pin with the tool by pushing it in toward the band. Slightly push down at the same time, so the pin pops out. Repeat on the other half of the band.Step 3Insert new pins into the new watch band by sliding the pins in the small top loop of the band where it will be attached to the watch case. Insert one pin in each half of the watch band. Make sure the ends of the spring bar protrude from both sides of the band.Step 4Match the bands with the correct side of the watch case. The short half of the band should be attached to the lugs at the end with the 12 at the top of the watch face, and the longer half should be attached to the lugs at the end with the 6 at the bottom of the watch face. Remember, you should see the inside of the watch band when attaching it to the case, because the case is upside down.Step 5Insert one end of the spring pin into its hole in the case lug. To insert the other end of the pin, use the watch spring tool to compress the pin and slide it into its hole. A similar action to what you performed in Step 1 to remove the watch band. Gently move the band around and listen for a click sound to ensure that the spring pin is in place.Step 6Do Step 4 on the other half of the band again to finish the process.Tips Warnings Always be careful as it is easy to cut your hands trying to change a watch band. The case lugs and crystal can be scratched by the watch spring tool easily. You don't even need a special Longines watch pin. A normal pin works. If you're buying these pins, be sure to get the correct size. It is the right size for your Longines watch. Any brand of band is ok. It does not have to be limited to a Longines brand leather band. Never mind if the back of the watch case does not indicate the lug distance, you can get this information easily from the Longines website or a local jeweler.